manualshive.com logo in svg

YARDMAX YB6870, Руководство оператора

Поделиться
Скачать
YARDMAX YB6870 Скачать руководство пользователя страница 14

TIRES

CABLE BINDING

The tires are over-inflated at factory for shipping purposes. 
Check the pressure in the tires prior to usage. Reduce or increase 
air pressure to ensure equal tire pressure to the manufacturer’s 
recommended pressure. The recommended air pressure can be 
found on the tire sidewall.

bind the two cables to the chute rod by two cable ties.

Figure 7

  

× 2

13

YB6870PM00 - 1807

|

   Assembly

Under any circumstance do not exceed manufacturer’s 
recommended pressure. Excessive pressure when 
seating beads may cause tire/rim assembly to burst 
with force sufficient to cause serious injury. Refer to 
side wall of tire for recommended pressure.

Equal tire pressure should be maintained at all times. If 
the tire pressure is not equal in both tires, the machine 
may not travel in a straight path and the scraper blade 
may wear unevenly.

Keep tires free of gasoline and oil, which can harm 
rubber.

Содержание YB6870





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды