YardCraft Cydonia Vinyl Playset, Инструкция по сборке

Страница: 6 / 26

6
Lay out floor boards. Notice the two shorter ones
between posts and narrow one in the center. Make sure
the floor boards are flush with the 2x6 .
Fasten using 1 1/2" screws.
Measure to ensure the floor frame is square before
continuing.
Using 6 7 /8" bolts, being fastening 2x6's to tower 4x4.
Thread acorn nut onto rod as far as you can, then back off
several turns. Be sure to place washer between acorn and
vinyl. Only tighten acorn nuts after brackets are on each
corner.
Step 9:
Step 12:
Step 11:
Step 10:
Cydonia Vinyl Playset Assembly Manual