background image

2

Finding and Recording Model Number

Model Number

Serial Number

Table of Contents

This Operator’s Manual is an important part of your new tiller. It will help you assemble,  

prepare and maintain the unit for best performance. Please read and understand what it says. 

www.yardman.com

MTD  LLC

P. O. BOX  361131

CLEVELAND,OH 44136

330-220-4683

800-800-7310

BEFORE YOU BEGIN ASSEMBLING YOUR NEW 
EQUIPMENT, please locate the model plate on the equipment 
and copy the information to the sample model plate provided 
to the right. You can locate the model plate by looking at 
the rear of the tine shield. This information is important for 
use when visiting the manufacturer’s web site, obtaining 
assistance from the Customer Support Department, or when 
communicating with an authorized service dealer.

Please do 

NOT

 return the unit to the retailer from which it was  

purchased, without first contacting Customer Support.

Customer Support

If you have difficulty assembling this product or have any questions regarding the controls, operation, or maintenance of this 
unit, you can seek help from the experts. Choose from the options below:

1.  Visit www.

yardman.com

. Click on the Service & Support menu option. 

2. Phone a 

Customer Support Representative

 at 1 (800) 800-7310.

3. The 

engine manufacturer

 is responsible for all engine-related issues with regards to performance, power-rating, 

specifications, warranty and service. Please refer to the engine manufacturer’s Owner’s/Operator’s Manual, packed 

separately with your unit, for more information. 

 

Safety Labels ...................................................... 3
Safe Operation Practices ................................... 4
Assembling Your Tiller ........................................ 6
Know Your Tiller .................................................. 8
Operating Your Tiller ......................................... 10

Making Adjustments ........................................ 11
Maintaining Your Tiller ...................................... 12
Troubleshooting ................................................ 13
Parts Lists ......................................................... 14
Warranty ............................................ Back Cover

Содержание 450 Series





















Отзывы: