background image

 5

Figure 2  Safety labels found on your unit

DANGER

TO AVOID SERIOUS INJURY:

• 

DO NOT DEPOSIT BRANCHES LARGER THAN 1/2 INCH DIAMETER INTO THIS HOPPER.

• 

WEAR APPROVED SAFETY GLASSES, GLOVES AND EAR PROTECTION.

   

AVOID LOOSE FITTING CLOTHING.

• 

Read the Owner’s Manual before starting and using this chipper/shredder.

 Keep hands, feet, face and clothing out of shredder hopper inlet and chipper chute inlet.

• 

Keep hands, feet, face and clothing away from discharge area and moving parts.
• Keep hands and feet out of discharge opening when chipper/shredder is running. The 

      

rotating cutting blades inside opening will cause serious personal injury.

• Do not transport unit with engine running.

• 

Keep bystanders, children, and pets away from operating and discharge 

WARNING

TO AVOID A FIRE HAZARD, KEEP LEAVES, GRASS, AND OTHER COMBUSTIBLE
MATERIALS AWAY FROM HOT ENGINE AND MUFFLER.

• If chipper/shredder jams or becomes clogged, shut engine off right away and wait for
   all moving parts to come to a complete stop. Disconnect the spark plug wire and prevent 
   it from touching the spark plug. Use only a long wooden stick (or long-handled shovel) to 
   clear away discharged materials or blockages.

• Keep all shields and guards in place and securely attached.

• DO NOT use hands or feet to clear material from the discharge area or discharge opening.

• DO NOT install parts, or remove, adjust, or service the discharge screen or any other part while
   the chipper/shredder is running. DO NOT operate the chipper/shredder on uneven ground, or on a 
   paved, gravel, or hard surface. DO NOT run engine in an enclosed area-exhaust gas contains 
   poisonous carbon monoxide fumes.

AC

0158A

WARNING

TO AVOID A FIRE HAZARD, KEEP LEAVES, GRASS, AND OTHER 

MATERIALS AWAY FROM HOT ENGINE AND MUFFLER.

• If chipper/shredder jams or becomes clogged, shut engine off right away and wait for
   all moving parts to come to a complete stop. Disconnect the spark plug wire and prevent 
   it from touching the spark plug. Use only a long wooden stick (or long-handled shovel) to 
   clear away discharged materials or blockages.

• Keep all shields and guards in place and securely attached.

• DO NOT use hands or feet to clear material from the discharge area or discharge opening.
• DO NOT install parts, or remove, adjust, or service the discharge screen or any other part while

   the chipper/shredder is running. DO NOT operate the chipper/shredder on uneven ground, 

   paved, gravel, or hard surface. DO NOT run engine in an enclosed area-exhaust gas contains

   poisonous carbon monoxide fumes.

WARNING:   DO NOT OPERATE
TH IS MACHINE UNLESS THE
CHUTE DEFLECTOR HAS BEEN
PROPERLY INSTALLED AND IS
S E C U R E D   WIT H   TH E   H A N D

KNOBS.

ROTATING CUTTING BLADES.
KEEP HANDS AND FEET  OUT
OF OPENING WHILE MACHINE
IS RUNNING.

DANGER

!

 COMBUSTIBLE

or on a 

Содержание 462 Series

















Отзывы: