background image

2

TABLE OF CONTENTS

Content

Page

Important Safe Operation Practices .................................................................... 3, 4

Assembling Your Cultivator.................................................................................. 5

Know Your Cultivator ........................................................................................... 8

Operating Your Cultivator..................................................................................... 9

Making Adjustments ............................................................................................ 12

Maintaining Your Cultivator .................................................................................. 13

Off-Season Storage ............................................................................................. 15

Troubleshooting.................................................................................................... 15

Parts List .............................................................................................................. 16

FINDING MODEL NUMBER

This Operator’s Manual is an important part of your new cultivator. It will help you assemble, prepare and 
maintain the unit for best performance. Please read and understand what it says.

Before you start assembling your new equipment, please locate the model plate on
the unit and copy the information from it to the space provided below. The information on
the model plate is very important if you need help from our Customer Support
Department or an authorized dealer.

You can locate the model number by standing in the operating position behind the unit and looking
on the left side of the engine next to the On/Off Stop Control Switch. A sample model plate is
explained below. For future reference, please copy the model number and the serial number of the
equipment in the space below.

CALLING CUSTOMER SUPPORT

If you have difficulty assembling this product or have any questions regarding the controls, operation or
maintenance of this unit, please call the Customer Support Department.

Call 1- (800)-345-8746, or in Canada 1- (800)-668-1238, to reach a Customer Support 
representative. Please have your unit’s model number and serial number ready when you
call. See previous section to locate this information. You will be asked to enter the serial
number in order to process your call.

Copy the model number here:

Copy the serial number here:

Copy the parent part number here:

Содержание 21A-120R000





















Отзывы: