16
WARNING!
The tool runs for approximately 5 seconds after it has been switched off. Let the
motor come to a complete standstill before setting the tool down.
WARNING!
Ensure product is switched off and disconnected from the power supply when
Blower Mode (Fig. 16)
• Close vacuum cover firmly.
• Attach the blower tube assembly to the motor housing.
• Connect extension cord to the tool, then plug into power supply.
• Hold the blower tube approximately 2 to 4 inches above the ground, turn the blower vac on
and using a sweeping motion from side to side, advance slowly keeping the accumulated
debris/leaves in front of you.
• Once you have blown the debris/leaves into a pile, you can convert to vacuum mode to collect
the debris.
Fig. 16
Vacuum Mode (Fig. 17)
• Remove blower tube.
• Attach the vacuum tube.
• Attach the collection bag to the motor housing.
• Connect extension cord to the tool, then plug into power supply.
• Position the tube slightly above the debris/leaves. Turn the blower vac on, then using a
sweeping motion the debris/leaves will be sucked up the tube, mulched and deposited into the
collection bag.
• As the bag fills the power of the suction will decrease, turn the blower vac off and unplug from
power supply and remove the bag from the machine to empty the bag.
OPERATION
