11
ASSEMBLY
ASSEMBLY FOR BLOWER MODE
1. Attaching the blower tube (Fig. 3 & 4)
WARNING!
Ensure product is switched off and disconnected from the power supply when
Ensure vacuum cover is attached to the motor housing. If not, attach cover as shown in Fig. 3.
NOTE:
Tool will not operate in blower mode without vacuum cover in place.
Fig. 3
Fig. 4
2. Push the lower tube firmly into the upper tube, until the tubes “clicks” into place.
Fig. 3
Fig. 4
3. Push blower tube forward until the lock button on the blower housing "clicks" into the slot on
the tube as shown in Fig. 5.
NOTE: Blower tube must be assembled to the motor housing before use. Never operate without
tube assembled.
Fig. 5
Fig. 6
