Yard force SA600H Скачать руководство пользователя

Страница: 10 / 33

• Inspect the machine before each use. Never operate

the machine if safety devices (e.g. impact protector,

parts of the cutting facility or bolts) are missing, worn

out or damaged. Check the power cable and starting

lever (if any) for damage. To avoid imbalance, all tools

and bolts must be changed as complete sets.

• Only use spare parts and accessories that have been

supplied or recommended by the manufacturer. The

use of alien parts results in the immediate loss of all

guarantee claims.

• Ensure that all nuts, bolts and screws are firmly

tightened and that the machine is in a safe working

condition.

• Never try to repair the machine yourself, unless you

have been trained accordingly. All work that has not

been listed in these instructions must only be carried

out by authorised servicing agencies.

• Treat the machine with the greatest care. Always keep

the tool clean. Follow the maintenance instructions.

• Never overload the machine. Always work within

the specified capacity range. Do not use low-power

machines for heavy-duty work. Do not operate the

machine for purposes for which it is not intended.

Electrical safety:

CAUTION!

The following states how to avoid accidents and

injuries due to electric shock:

• Before each use, carry out a visual inspection of the

power and extension cord for any signs of damage

or ageing. Damaged mains power cables increase

the risk of electric shock.

• Connect the machine to a power socket with a

residual-current circuit breaker that has a rated

current of no more than 30 mA.

• Always keep the extension cable well away from

the cutting tools. Should the power cable become

damaged during work, instantly disconnect the

power cable from the mains. DO NOT TOUCH

THE POWER CABLE BEFORE IT HAS BEEN

DISCONNECTED FROM THE MAINS! Risk of electric

shock.

• The supply cord cannot be replaced. If the cord is

damaged the appliance should be scrapped.

• Keep extension cable away from blades and other

moving parts. They may damage the cable and

result in contact with live parts.

• Check that the mains voltage is the same as

indicated on the rating plate.

Maintenance and storage

• Keep all nuts, bolts and screws tight to be sure the

machine is in a safe working condition.

• Replace worn or damaged parts for safety.
• Ensure that only the recommended replacement

cutting blades are fitted.

SAFETY PRECAUTIONS

Содержание SA600H


































Результаты поиска

Содержание SA600H

Отзывы:

Похожие инструкции для SA600H

Бренды по названию

Популярные бренды

Yard force SA600H, Оригинальное руководство пользователя

Результаты поиска

Содержание SA600H

Отзывы:

Похожие инструкции для SA600H

Бренды по названию

Популярные бренды