44
45
Returning to the charging station
After approximately 90 minutes of mowing and when the mower’s battery power is low, the
mower will automatically return to the charging station by locating the closest boundary
cable and following it anticlockwise (without mowing) back to the charging station for a full
recharge. The display of the mower will show a charging symbol during charging.
When charging is complete, the mower will continue with the next mowing cycle.
The mower will also return to the charging station if you press the HOME button on
the control pane and then manually close the control panel cover. It also stays at the charging
station during spare time (no work is assigned).
If for some reasons the mower cannot successfully return to the charging station, it will
attempt five times before staying on the lawn and turning itself off to save battery power. In
this case, check if the charging station is correctly installed.
In addition, if the ambient temperature is higher than 40° C, the mower will stop charging to
protect the battery. Charging will resume when the temperature drops to a suitable ambient
temperature.
Programming the mower
The mower can be programmed through the control menu which can be accessed from the
control panel(10) of the mower.
IMPORTANT:
Set the date and time first as this is the base for the rest of the programming.
Note: The control panel can only be accessed by pressing the STOP button on the
top of the mower to unlock the control panel cover and ensure that the mower stops
working when you are programming it. After programming, the control panel cover
must be manually closed to resume the mower working and start carrying out the
programmed activities.
Control panel
The control panel consists of the touch-sensitive display and physical
buttons. The physical buttons serve as a backup when there is any difficulty to use the touch-
sensitive display (e.g. low temperature).
Functions of the physical buttons:
Button
Description
(up)
Each press of the button will move the selection cursor
upwards/ leftwards, or toggle among the available options in a
setting.
(down)
Each press of the button will move the selection cursor
downwards/ rightwards, or toggle among the available options
in a setting.
Enter
Press the button to confirm a selection in the control menu.
station.
Home
Press the button to return the mower to the charging station for
charging.
Start
Press the button to start a mowing cycle.
Back
Press the button to return to the previous screen in the control
menu.
OPERATION
OPERATION
