Yard force LT G33, Оригинальное руководство пользователя

Страница: 6 / 16

10 11
PRODUCT SAFETY WARNINGS
OTHER SAFETY WARNINGS
1. Avoid Dangerous Environments – Don’t use trimmers
in damp or wet locations.
2. Always turn the line trimmer off or remove the battery
pack whenever leaving the trimmer unattended.
3. Don’t Use In Rain.
4. Keep Children Away – All visitors should be kept at a
distance from work area.
5. Dress Properly – Do not wear loose clothing or
jewelry. They can be caught in moving parts.
Use of rubber gloves and substantial footwear
is recommended when working outdoors. Wear
protective hair covering to contain long hair.
6. Use Safety Glasses – Always use a face or dust mask
if operation is dusty.
7. Use the Right Tool – Do not use the tool for any job
except that for which it is intended
8. Don’t Force the Trimmer – It will do the job better and
with less likelihood of a risk of injury at the rate for
which it was designed.
9. Don’t touch moving hazardous parts before the
machine is turned off or removed the battery pack
and the moving hazardous parts have come to a
complete stop.
10. Don’t Overreach – Keep proper footing and balance
at all times.
11. Stay Alert – Watch what you are doing. Use common
sense. Do not operate the trimmer when you are tired.
PRODUCT SAFETY WARNINGS
12. Do not operate the trimmer while under the influence
of alcohol or drugs.
13. Keep guards in place and in working order.
14. Store Trimmer Indoors – When not in use the trimmer
should be stored indoors in a dry and high or locked-
up place with the battery pack removed – out of
reach of children.
15. Maintain Trimmer With Care – Keep the cutting
attachment clean for best performance and to reduce
the risk of injury. Follow instructions for changing
accessories. Keep handles dry, clean, and free from
oil and grease.
16. Check Damaged Parts – Before further use of the
trimmer, a guard or other part that is damaged should
be carefully checked to determine that it will operate
properly and perform its intended function. Check for
alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other condition
that may affect its operation. A guard or other part
that is damaged should be properly repaired or
replaced by an authorized service center unless
indicated elsewhere in this manual.
17. Clear the area to be cut before each use. Remove all
objects such as rocks, broken glass, nails, wire, or
line that can be thrown or become entangled in the
cutting attachment. Make sure that other persons and
pets are at least 15m away.
18. Before using the machine and after any impact, check
for signs of wear or damage and repair as necessary.