22
23
SYMBOLS
Warning symbols on the charger
To reduce the risk of injury, user must read
instruction manual carefully.
The charger is for indoor use only.
Double insulation
WEEE symbol. Waste electrical products should
not be disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or local store for recycling advice.
The product complies with the applicable
European directives and an evaluation method of
conformity for these directives was done.
SMPS (Switch mode power supply unit)
incorporating a short-circuit-proof safety isolating
switching power supply.
SMPS (Switch mode power supply unit)
Conforms to relevant UK regulatory requirements
TECHNICAL DATA
Model
LS F12
Mains voltage
12 V
No load chain speed
7 m/s
Cutting diamater. Max.
100 mm
Sound pressure level: L
pA
xx.x dB(A)
Sound power level: L
wA
xx.x dB(A)
Vibration front handle
xxxx m/s
2
Weight:
1.6 kg
Battery pack model
AL F40
Capacity
12 V , 4.0 Ah
Charger model
AL F03
Input
120–240 V~, 50/60 Hz
Output:
13 V , 3 A
The vibration emission level stated in this instruction manual has been measured in
accordance with a standardized test given in EN 62841; it may be used to vibration when
using the tool for the applications mentioned:
• using the tool for different applications, or with different or poorly maintained accessories,
may significantly increase the exposure level
• the times when the tool is switched off or when it is running but not actually doing the job,
may significantly reduce the exposure level.
Protect yourself against the effects of vibration by maintaining the tool and its accessories,
keeping your hands warm, and organizing your work patterns.
