Yard force LM C33, Оригинальное руководство пользователя

Страница: 31 / 32

26 27
TROUBLESHOOTING
WARNING: Before performing any repair work, always ensure that the battery pack
has been removed.
WARNING: Always wear heavy duty gloves when adjusting or cleaning, especially
when handling sharp objects.
Fault/malfunction Cause Remedy
Mower fails to start
Safety key is not inserted Insert safety key
Battery is not correctly inserted Remove the battery and reinsert
Mower standing in high grass
Start motor on shorter grass or
already mowed area, change cutting
height if necessary
The mower housing is clogged
Clean housing so that the blade can
move freely
Battery has no power Check and recharge battery
Mower stops working
/loses power
Cutting height is incorrect Adjust the cutting height
Cutting blade is worn or
damaged Replace with new blade from dealer
service centre
Battery performance
decreasing Check the battery performance and
charge it if necessary
Grass bag is not filled
sufficiently
Cutting height is too Low
Adjust and increase cutting height
The lawn / grass is wet
Allow the lawn to dry
Underside of the mower deck
is clogged.
Clean the underside of the mower
deck
Cutting blade is worn or dam-
aged.
Replace it by contacting the custom-
er service centre
Mower vibrating at
higher speed
Cutting blade is unbalanced
Balance the blade by grinding each
cutting edge until equal
Blade is Loosened /incorrectly
fitted
Tighten the blade bolt
Mower cuts unevenly The blade is damaged
Blade is assembled incorrectly
Sharpen the blade or replace
Re-assemble blade correctly
Storage and transport
Storage
After cleaning the unit thoroughly, store mower in a dry room and allow the motor to cool
down.
NOTE: Remove the safety key and battery packs. Ensure cables are not trapped when
folding/unfolding the handle. If stored vertically make sure the mower is positioned in a corner
so that the blade is facing inwards against a wall and the machine is secure to prevent it
falling over.
Transport
Use the original packaging to ship whenever possible.
MAINTENANCE AND STORAGE