Yard force ET U25, Оригинальное руководство пользователя

Страница: 22 / 25

22
Fault/malfunction Cause Remedy
Line trimmer fails to start
Not connected to
power supply
Connect to a proper power
supply
Power cord or plug is
defective
Call after sales support
Other electrical defect
to the
product
Call after sales support
Line trimmer stops while
cutting
The motor shaft or
trimmer head is bound
with grass.
Stop the trimmer, and
remove the grass from the
motor shaft and trimmer
head.
The motor is over-
loaded
Remove the trimmer head
from the grass. The motor
will recover to work as soon
as the load is removed.
When cutting, move the
trimmer head in and out
of the grass to be cut and
remove no more than 20cm
of length in a single cut.
line trimmer is too
hot.
Allow the trimmer to cool
down for a while.
Trimmer head will not ad-
vance line
The motor shaft or
trimmer head is bound
with grass.
Stop the trimmer, and
remove the grass from the
motor shaft and trimmer
head.
There is not enough
line on the spool.
Replace the cutting line
MAINTENANCE AND STORAGE