12
13
GB
GB
Technical Data
Model
EasyMow 260B
Max cutting area
260 m
2
Battery pack
20 V/2000 mAh
Switch power supply
Input: 100-240 V~, 50/60 Hz, 42 W
Output: 24V
, CC1.5 A
Power supply model*
FY2401500S1/FY2401500S2/FY2401500S3
Mowing time on one charge
60 min
Rated voltage
20 V
Rated power
42 W
No load speed
3500 min
-1
Cutting width
16 cm
Cutting height
Approx 20-55 mm
Charging time
100 min
Blade model
846210
Weight
8.2 kg
Frequency Band
0-148.5 kHz
Magnetic Field Strength
70 dBμA/m
Wireless Frequency Rang/Power
2.4-2.4835 GHz/<0 dBm
Max sound pressure level
L
pA
=55.8 dB, K=3 dB
Max sound power level
L
wA
=66.8 dB, K=3 dB
Degree of protection:
Robotic Mower
IP24
Switching power supply
IP67, Plug IP44
Spare parts
Spare Blades
3 Pcs
Boundary pegs
100 Pcs
Boundary wire
80 m
Connectors
3 Pcs
*
WARNING: For the purposes of recharging the battery, only use the detachable supply unit
provided with this appliance.
Maintenance and storage
Maintenance work that has not been described in these instructions must be carried out by a
servicing agency authorised by the manufacturer. Only use original parts.
Maintenance
Check and clean your Robotic Mower regularly and replace worn parts if necessary. Preferably
use a dry brush, a damp cloth or a sharpened wooden piece.
Never use flushing water.
Following these maintenance instructions can extend your Robotic Mower's service life.
Battery Life
The Robotic Mower has a maintenance free Li-ion battery, with an estimated life of more than 2
years (depending on treatment and usage).
Winter Storage
During winter, keep your mower, docking station and power supply in a dry place.
We recommend a shed, garage or preferably store it indoors.
Prepare your device for winter storage as follows:
1.
Fully recharge the battery.
2.
Set the mains power switch to "OFF".
3.
Thoroughly clean your Robotic Mower.
4.
Unplug the power supply from the mains outlet.
5.
Disconnect the power supply from the docking station.
6.
Disconnect the boundary wire from the docking station. Lift up the docking station and clean.
The boundary wire can remain outside. However, it is imperative to protect the wire against
corrosion. We recommend a water-free grease or suitable sealing tape.
If available, repack the product in the original packaging.
Alternatively, our service centre offers a winter service for your device. This will include a check-up
of all parts and - if available - a software upgrade.
Preparing for spring
After winter storage, please clean the charging contacts on both the Robotic Mower and the
docking station.
Use a fine abrasion paper or a brass brush; this will help to achieve the best charging efficiency
and avoid any charging interference.
Cleaning the mower body
As your Robotic Mower is battery powered you need take care when cleaning. Remove rough dirt
with a soft brush. Use a manual water spray with mild household detergent for intensive cleaning.
Wipe off any residue after cleaning with a moist rag.
Disposal
To help the environment, please dispose of the product properly when it has reached the end of
its useful life and not in the household waste. Information on collection points and their opening
hours can be obtained from your local authority.
Li-ion Environmental damage through incorrect disposal of the batteries / rechargeable batteries.
Remove the battery pack from the product before disposal. Batteries /rechargeable batteries may
not be disposed of with the usual domestic waste. They may contain toxic heavy metals and are
subject to hazardous waste treatment rules and regulations. Please dispose of batteries according
to the relevant local requirements.
