![background image](http://html1.mh-extra.com/html/yard-force/aquajet/aquajet_original-instructions-manual_905838023.webp)
23
INSTALLATION
Install the extension lance (Fig. C)
1. Press the extension wand into the gun. (You will feel a slight spring resistance)
2. Secure the attachment by twisting.
Fitting the 3 in 1 nozzle (Fig. D)
Press the hold button on the extension lance, and then fit it into the 3 in 1 nozzle, make sure
nozzle is locked in position.
Connect the hose (Fig. E)
Attach hose to the device, make sure it is locked in to position when you hear the sound
"click" .
Chose the inlet function (Fig. F)
There are 2 water connection options:
1. Use the self priming function,
Put the hose and filter unit into the water source and make sure the filter unit is sunk below
the water level.
2. Use the garden hose
Connect to water supply
In keeping with current regulations a pressure washer must never be operated from the
drinking water mains supply without a controllable backflow preventer. A suitable backflow
preventer in conformity with EN 12729 type BA must be used.
Water that has passed through a backflow preventer is classified as undrinkable.
NOTE
: A backflow preventer is available from specialist retailers.
NOTE
: Water pressure out from the tap should not higher than 0.6Mpa.
Attach garden hose to water supply and turn water valve to fully on position.
Содержание AQUAJET
Страница 3: ...3 A B 1 2 3 4 5 6 7 8 a b d c f g h i j e ...
Страница 4: ...4 C D G H I J E F 1 1 2 2 3 ...
Страница 5: ...5 K L O P Q R M N 1 2 1 1 2 2 ...
Страница 6: ...6 S T ...