manualshive.com logo in svg

Yara N-Sensor, Руководство по эксплуатации, Страница: 23 / 64

Поделиться
Скачать
Yara N-Sensor Скачать руководство пользователя страница 23

Yara N-Sensor V3.10  

 

Operation Manual

 

4 Task 

management 

Generally, the N-Sensor handles up to 99 individual tasks, whereas usually one task 
should correspond to one field. Each task can be regarded as a storage location for N-
Sensor data. Tasks are numbered from 1 to 99 and contain general field information 
(i. e. field name, field size, comment) together with a link to the corresponding N-
Sensor log-file where all recorded data is stored. In addition, prescription maps (some-
times referred to as “raster maps”) can be attached to a task optionally. 

Tasks can be prepared either on a desktop PC using the separate 

CardWriter

 software 

or “on the fly” by filling in the menu entries in the 

Task

 menu. In the simplest case, noth-

ing needs to be prepared or filled in; just a task number has to be selected. 

To enter the 

Task

 menu, press the 

Select tasks 

button in the main menu bar. Usually, this 

menu is entered once on each individual field before N-application is started. 

The task that has been last selected when the 

Back

 button is pressed will be 

used for data logging. The corresponding task number is displayed on the 

work screen together with the field name and other related information. 

 

 

 

Task No.: 

The number (1-99) of the selected task. Tasks can be flipped 

through using the 

Minus

 and 

Plus

 keys or they can be addressed directly by 

entering the task number into this data field. 

Customer:

 A customer name entered here will be displayed on the map printout later. 

If 

CardWriter

 has been used for task preparation, customer names previously en-

tered into the 

CardWriter

 database can be chosen from the drop-down menu. 

Field name:

 The name of the field will appear on the work screen and in the file name 

of the corresponding log-file. If no field name is entered, only the task number and 
the date of operation will be used to name the log-file. If 

CardWriter

 has been used 

to prepare the tasks, field names previously entered into the 

CardWriter

 database 

can be chosen from the drop-down menu. Note that only those fields are displayed 
which are assigned to the selected customer. 

Last revised: 28.01.2009 14:39 

Page 23 of 64 

Содержание N-Sensor

































































Отзывы:

Нет отзывов