manualshive.com logo in svg

Yanmar SC 2400, Руководство оператора

Компактный и универсальный трактор Yanmar SC 2400 обеспечит вам эффективную работу на вашем участке. На нашем сайте вы можете бесплатно скачать Руководство оператора для Yanmar SC 2400. Посетите manualshive.com, чтобы загрузить руководство в формате PDF и быть в курсе всех функций вашей техники.

Поделиться
Скачать
background image

1-3

1. SAFETY PRECAUTIONS

Sc2400 Operator’s Manual

1. Understand the performance and limitations of 

your tractor. Carefully study this 

Operator’s 

Manual

 and learn the instructions in it before 

operating or servicing your tractor. Keep the 

Operator’s Manual

 in an easily accessible place.

2. Strictly follow the statements given in the 

DANGER, CAUTION and WARNING safety 
decals attached to the tractor.

3. For operator safety, always install the Roll-Over 

Protective Structure (ROPS).
Keep the seat belt fastened while operating the 
tractor with the Roll-Over Protective Structure 
(ROPS). This practice will reduce the possibility 
of injury or death in the event of roll-over 
accident.
If the Roll-Over Protective Structure (ROPS) has 
been removed for any reason, be sure to reinstall 
all the associated parts before operating the 
tractor.
Do not alter the Roll-Over Protective Structure 
(ROPS). The altered Roll-Over Protective 
Structure (ROPS) may fail to provide the 
designed protection.
Replace the damaged Roll-Over Protective 
Structure (ROPS) immediately. Contact your 
local Cub Cadet Yanmar dealer for technical 
assistance.
NEVER alter or repair the Roll-Over Protective 
Structure (ROPS). Welding, bending, drilling, 
grinding, or cutting may weaken the Roll-Over 
Protective Structure (ROPS). Contact your local 
Cub Cadet Yanmar dealer for technical 
assistance.

4. Always fasten the seat belt while operating the 

tractor with the Roll-Over Protective Structure 
(ROPS).
Check the seat belt for any damage. Replace the 
damaged seat belt immediately. Contact your 
local Cub Cadet Yanmar dealer for technical 
assistance.
Do not use the seat belt if the tractor does not 
have the Roll-Over Protective Structure (ROPS).

5. Check overhead clearance carefully before 

driving under power lines, wires, bridges or low 
hanging tree branches, before entering or leaving 
building, or in any other situation where the 
operator and/or Roll-Over Protective Structure 
(ROPS) may be struck, which could result in 
serious injury.

6. Make sure that any person (other than a usual 

operator) who will operate the tractor studies this 

Operator’s Manual

 before operation. Know the 

controls and how to stop the machine quickly.

7. Make sure that any person or obstacle is not 

under or around the tractor before and during 
operation. Be sure to maintain sufficient 
overhead clearance above the tractor.

8. Do not operate your tractor and/or implement 

installed to it while you are under the influence of 
alcohol, drug, medicine or controlled 
substance(s) or when you are not fit for operation 
of your tractor.

9. For operation, wear close-fitting clothing. When 

operating the tractor or working around the 
tractor, do not wear loose-fitting clothes or 
jewelry, or baggy or damaged clothing. When 
caught by a moving part of the tractor, an 
accident can result. Cut-off pants or shorts do not 
provide protection against flying debris. Never 
operate the tractor in bare feet, sandals, or 
sneakers. Wear additional protections including 
non-slip safety boots or shoes, and safety 
goggles and gloves, etc. as appropriate or 
required by currently applicable local laws and 
regulations. Wear ear protection in a noisy 
environment to prevent hearing damage and 
reduce operator fatigue.

10. NEVER allow a passenger on any portion of the 

tractor.

11. Remain seated in the operator’s station when 

operating the tractor.

12. Make sure that the brakes, clutch and other 

mechanical components are free from 
misadjustment and excessive wear. Replace any 
excessively worn or damaged component 
immediately. At regular intervals, check that all 
the nuts, bolts and screws are appropriately 
tightened. (For details, see “MAINTENANCE”)

3. Precautions before Operating Your Tractor

Downloaded from 

www.Manualslib.com

 

manuals search engine

 

Содержание SC 2400






































































































































Отзывы:

Нет отзывов

Похожие инструкции для SC 2400

GE GCG1700II Installation Instructions Manual preview
GCG1700II
Бренд: GE Страницы: 24
Hagie STS 10 Combo Operator'S Manual preview
STS 10 Combo
Бренд: Hagie Страницы: 149
Cub Cadet 3205 Operator'S Manual preview
3205
Бренд: Cub Cadet Страницы: 40
Mahindra e Max 22 HSTs Operator'S Manual preview
e Max 22 HSTs
Бренд: Mahindra Страницы: 90
Field Tuff FTF-2GBF4S Owner'S Manual preview
FTF-2GBF4S
Бренд: Field Tuff Страницы: 4
KitchenAid 9871780B Use And Care Manual preview
9871780B
Бренд: KitchenAid Страницы: 16
Victory BACKHOE BH6 Operator'S Manual preview
BACKHOE BH6
Бренд: Victory Страницы: 91
Lipco UF 100 Translation Of Original Instructions preview
UF 100
Бренд: Lipco Страницы: 28
FIORENTINI TX020 User Manual preview
TX020
Бренд: FIORENTINI Страницы: 14
Displays2go “THANK YOU” DUAL Assembly Instructions preview
“THANK YOU” DUAL
Бренд: Displays2go Страницы: 2
Displays2go CIRCULAR TOP OPENING Assembly Instructions preview
CIRCULAR TOP OPENING
Бренд: Displays2go Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды