RMB/ENERGIE GmbH | 5
Safety information
Manual neoTower
®
Power Storage | (02/2022)
2. Safety information
2.1 Intended use
The unit is a battery power storage system which can
boost coverage of the building’s power consumption.
With this system the surplus generated electricity is
stored in high-quality, modern batteries.
The system may only be used if it is in perfect
technical condition and has been commissioned by the
manufacturer or by a specialist partner authorised by
the manufacturer.
Intended use also includes reading and complying with
the instructions in this manual.
Any other use is considered to be contrary to the
intended use.
2.2 Authorised target groups
This manual is intended for different target groups that
are authorised for specific assignments.
2.2.1 Manufacturer
The manufacturer supplies the product and has the
following responsibilities:
−
Training of technicians for assembly, maintenance,
disassembly and disposal.
−
Commissioning of the system.
Only the manufacturer has access to the "Expert" area
in the "RMB/Control".
2.2.2 Operator
The operator is responsible for the building in which
the product is used. The operator has the following
responsibilities:
−
Compliance with requirements by the energy
supplier (e.g. registration, licensing, remuneration).
−
Compliance with the installation site requirements.
−
Induction of users.
−
Compliance with legal occupational safety
regulations.
−
Compliance with applicable safety, accident
prevention and environmental protection
regulations.
−
Provision and observance of documentation.
−
Ensuring that the product is always in a technically
perfect condition.
−
If necessary, storage of the system.
2.2.3 Technician
Technicians are responsible for the assembly,
maintenance, disassembly and disposal of the product.
The following points must be observed:
−
Work may only be carried out by qualified personnel
who have been trained by the manufacturer and
are familiar with installation engineering, gas and
water installations as well as the applicable safety
regulations.
−
Special work during installation (e.g. work involving
the building’s structure or the ventilation system)
may only be carried out by appropriately qualified
personnel from specialist companies.
−
Electrical installations may only be carried out by
qualified electricians.
Only skilled personnel who have been trained by the
manufacturer have access to the "Technician" area in
the "RMB/Control".
2.2.4 User
Users are permitted to carry out certain operational and
cleaning tasks. User requirements:
−
Users must be trained by the operator on the
product.
−
They must be familiar with the instructions in this
manual.
Authorised users have access to the unprotected
areas in the "RMB/Control", but not to the "Expert" and
"Technician" areas.
