2TNV70-HGE
Industrial Diesel Engine
Length
16.4 in (418 mm)
Width
16.1 in (410 mm)
Height
19.8 in (503 mm)
*Rated power listed is NET engine output. The engine
operating environment and driven machine conditions
must be studied carefully when selecting an engine in
order to ensure correct engine selection, maximize
engine performance, extend engine service life and
improve machine capacity.
Consult the TNV Application Manual for additional en-
gine ratings and engine application information.
Materials and specifications herein are intended to serve as a guide in engine selection and subject to change without notice.
The International System of Units (SI) is used in this publication. Yanmar and its logos, as well as corporate identity used
herein, are trademarks of Yanmar and may not be used without permission.
Printed in USA
© 3.8.09 Yanmar
All Rights Reserved
Note: Dimensions depend on final specifications.
Ratings Definitions and Conditions
Application standards for Yanmar industrial engines: Inlet
air standard conditions with a total barometric pressure of
100kPa (29.5 in. Hg), with 30% relative humidity, and 25°
C (77°F).
_____________________________________________________________________________________________________
Performance Data
_______________________________________________
Dimensions
_________________________________________
_____________________________________________________________________________________________________
Rated Speed (rpm)
Net rated kW
Net rated
hp
3600 10.0
13.4
kW to Hp conversion used is expressed as:
hp
= (kW value) x 1.34
Please Contact Yanmar for Details
