YANGZI YZ-X8, Инструкция по эксплуатации

Страница: 14 / 18

12
6. Check the abrasion condition of suction scraper blade edge.
If thereis any wearout, change thetwoends of thetape.
7. Wipe the machine with a multi-purpose cleaner and wet cloth.
For the sake of safety, do not spray the machine with high pressure
Spray or hose down the machine to avoid electronic parts failure.
8. Check the wear condition of the skirt edge of the brush head, and replace it if it is
worn or damaged.
9. Charge the battery. In order to extend the service life of the battery and ensure the
optimal performance of the machine, the battery must be charged after the machine has
been used for more than 30 minutes.
Monthly maintenance per 80 hours of use
1. Remove the clean water tank filter from under the machine and clean the filter screen,
making sure to empty the water before removing the filter
Box.
2. Clean the top of battery to prevent electrode corrosion (refer to "Battery Maintenance").
3. Check whether the battery wiring is loose.
4. Check and clean the seal of the sewage tank cover.
Replacement in case of damage.
5. Spray silicone dry lubricant on all pivots and rollers and cover with a waterproof
lubricant to protect
Smooth operation of the wheel shaft.
Check whether the nuts and bolts on the machine are loose.
6. Check the machine for leakage.
Quarterly maintenance
Checkbrushwear of drive motors (drivemodels),vacuum motorsandbrush motors
every 250 hours.
When the brush length islessthan 10 mm wear, itisnecessary to replace the brush.
If the machine needs repair, please contact the authorized service center.
Warning: Electric shock hazard.
Disconnect the battery before repairing the machine.