YANGZI YZ-X6, Руководство по эксплуатации

Страница: 8 / 13

7
Notes for use of the floor washer
1. The voltage display meter should not be lower than 21V charging. Charging less than
21V will seriously damage the battery life, resulting in smaller battery capacity, too short
machine use time, and even can not charge
2. During the use of the machine, sewage should be discharged first, and clean water
should be injected into the machine's water box. If sewage is not discharged, clean
water should be injected and continued to be used, and the sewage level will be raised,
which will go into the suction motor along with the suction outlet and burn the motor.
3. It is strictly prohibited to use the machine without water. If the machine is changed
without water, dry dust will be washed into the sewage tank and then into the suction
air motor through the suction air outlet, resulting in slow motor speed.
4. The machine is strictly prohibited to drive into the road surface similar to the
The machine charges its batteries
Note: In order to extend battery life and ensure optimum performance of the machine, it
must be exceeded at least within the machine life
Charge the battery for more than 30 minutes.
Do not leave the battery uncharged for a long time.
The following charge says
It is applicable to the charger attached to the machine.
Be sure to use the following chargers to avoid battery damage.
Type of charger: charger for lead-acid battery
Output voltage: 24V
Output current: 15A
◆ Automatic power off circuit
◆ Suitable for deep circulating battery charging
The charging items
1. Digital electric meter display number & LT;
21. Please charge it immediately
2. When charging, please plug the charger into the charging docking port of the
machine and connect the 220V power supply.
3. When charging, please move the machine to a well-ventilated place for charging, and
open the sewage tank side for ventilation.
4. When the digital electricity meter shows the number reaches 26, it means the
charging is completed