YANGZI YZ-X6, Руководство по эксплуатации

Страница: 6 / 13

5
Specification: Rated voltage: 24VDC, maximum current: 110A
CM2010C controller is a high performance permanent magnet brushless motor
controller with the following functions:
Driving function:
full bridge power MOSFET control, realizing stepless control of
forward, rear, drive and braking.Realize the soft start and soft brake
Ø
Downhill speed limit and anti-backsliding function:
driving downhill without
exceeding the maximum allowed speed limit, and backsliding speed limit when
standing uphill
Diagnostic function:
The running state of the vehicle can be observed by LED status
light, 10-bar electrical meter and handheld programmer
Cart function:
close the cart switch and release the electromagnetic brake to facilitate
the cart
Brake function:
when the brake switch is in effect, the vehicle will decelerate and brake
immediately and finally stop
Head
Take out the
screw with an
Allen wrench to
open the machine
head
Controller
Controller:
Power cord: red
positive pole,
black negative
pole
Drive motor
wire: red
positive pole,
black negative
pole