background image

YZ-S5

14

Warranty is not covered under the following conditions of use:

● Failure to perform maintenance in accordance with the maintenance manual

may result in mechanical damage or failure.

●The mechanical appearance or structure is obviously damaged due to

improper operation.

●Disassembly or modification not approved by the original factory.

●Damage due to weather or force majeure.

●More than 1 year of warranty or more than 1500 hours of use.

Chapter 6 Battery Maintenance Guide

This product uses a lead-acid maintenance-free battery, which has the functions of

maintenance-free, maintenance-free, and automatic pressure relief. If it will not be

used for a long time, please disconnect the positive pole of the battery and store it.

1) Why lead-acid battery life is short?

The battery is undercharged for a long time, and it is not charged for a long time after

discharge. During the use process, there is often an overdischarge phenomenon. The

standard charger is not selected during charging, resulting in overcharge

phenomenon. The voltage is different, and a low-voltage working state is formed for a

long time.

2) After the battery is used up, how should it be stored?

The battery is a sensitive product. If it is not used for a long time, it is best to take the

battery out of the machine and put it in a dry place at room temperature; because the

battery is placed inside the machine and is not disconnected from electrical

appliances and circuit boards, it will form a battery Continuous maintenance

discharge.

3) What is overdischarge and how does it affect the performance of the battery?

It refers to the phenomenon that the electricity stored in the battery continues to

discharge after reaching the minimum working voltage. After the battery is

over-discharged, the voltage drops sharply in a very short period of time, and the

entire internal reaction system of the battery is disordered. Reduces battery usage

time and extends battery charging time.

! ! Deep discharge is strictly prohibited

When the battery is used up every day, please make up the power in time. No

matter how much the remaining power is, the battery needs to be fully charged

and stored.

Содержание YZ-S5



















Отзывы: