Shenzhen Yangda Security Co., Ltd
Add:3F, Block 5, Ji An Tai Industrial Area,XiHe,FuYong,
BaoAn district,ShenZhen,China, 518057
Email: [email protected] Web: www.yangdaonline.com
Gimbal control
1)Yaw axis control:speed mode,connect Rocker channel(or 3 gears channel,push gear
to middle position to stop)
2)Pitch axis control:speed mode,connect Rocker channel(or 3 gears channel,push
gear to middle position to stop)
3)Mode control:angle mode,connect knob channel(speed mode:connect 3 gears
channel or rocker channel)
If connecting knob channel,rotate to one end,the gimbal is at lowest speed when
controlling YAW and PITCH axis.
Rotate the knob to any position,gimbal is at higher speed when controlling YAW and
PITCH axis.Rotate to knob to another end,gimbal back to center position.
4)Multi:tracking control,connect 3 gears channel
Middle to low:quit tracking mode,cursor disappear
Low to middle:go to tracking mode,cursor appear
Middle to high:one square appears,object is locked,tracking is activated
Middle to high again:re-track mode,cursor appears in the square.Gimbal is still
tracking the object,now you can move the cursor to track another object(middle to
high gear again).
Camera control
1)Zoom control:daylight sensor zoom control,connect 3 gears or rocker channel
2)Focus:Picture in picture switch and palette switch,connect 3 gears channel.
Middle to Low:palette switch.
Middle to High:picture in picture switch.
3)PIC/REC:taking picture/recording,connect 3 gears channel
Middle to high,recording start
Middle to high again,recording stop
Middle to low,taking picture
Middle to low,taking another picture
yangdaonline.com
