DC Inverter U-match Series Cassette Type Unit
40
Unit: mm
(3) How to connect the connection wire and power cord:
Lead the connection wire and power cord through the insulation tube. Then fix
the wires with wire clamps (as shown in the next figure).
For the indoor unit whose packaging materials are with the buckle magnetic
ring. The engineering electric wires (live wire, neutral wire, earthing wire and
communication cable) should pass through the buckle magnetic ring before entering
into the unit. The magnetic ring should be fixed reliably by cable tie. The
engineering wires and buckle magnetic ring are not allowed to touch sharp edges.
The number of magnetic rings is based on 3.2.
(Note
：
Only for
YC12G4/I
,
YC18G4/I
,
YC42G4/I
,
YC48G4/I
,
YC60G4/I units)
