11
Description and Function of Each Part
Control Panel (Keys)
No. Name
Function
1
SET key
This key is used to select temperature/time mode.
2
▲
key
This key is used to increase the temperature/time parameter
3
▼
key
This key is used to decrease the temperature/time parameter
4 Water lever lamp
flicker
When the sterilizer is short of water, the lamp is flashing, when add water
to the "standard" water level, the water level lamp will be on persistently.
5 Press increase lamp
flicker
the steam pressure in sterilizer
≥
0.028Mpa, the indicator is light.
6
Interlock lamp flicker
Close the lid, after rotating until closing of the upper and lower handle, the
indicator is light.
7
Temperature lamp
The temperature parameter.
8
Time lamp
When set the sterilization time or countdown, the indicator is light.
9 Heating lamp
When the heater is in the working state, the indicator is light, in the
process of heat insulation, it is flashing.
10 Sterilizing lamp
When the sterilizer reaches the setting temperature (thermal insulation),
the indicator is light.
11 End lamp
after the end of sterilization, the indicator is light (the buzzer warning).
12 Time display
The display sterilizing time
8
7
4
12
1
2
3
11
9
10
5
6