16
Installation Method
Connecting method and assembling procedures of glass unit
③
RT101 model solvent collection device
Refer to the RT101 model instruction manual for the connection method.
④
RT200 model solvent collection device
The device consists of glass condenser and 500 milliliter collection flask. The device requires a
cooling water circulation unit.
Connect the vacuum hose between the exhaust nozzle of vacuum pump and IN nipple on the
RT200, as shown in the figure. The end connection of exhaust piping and cooling water piping on
the RT200 model are placed on the back surface of main unit.
Connected to the nozzle
on the back surface of RT200
IN
OUT
真空ポンプ
IN
OUT
To ventilation system
(such as a draft chamber)
Cooling water
circulation system
Exhaust IN
Exhaust OUT
Cooling OUT
Cooling IN
Vacuum pump
