20
4. Operating procedures
Operating sequence (Basic operation)
2) Turn controller power on.
Press the POWER key of the controller longer (one second).
The screen will switch to the stand-by screen for the last operation mode.
FIXED TEMP.
PAUSE
AUTO
START
AUTO
STOP
PROGRAM
PAUSE
TEMP. SET
TIME SET
ENTER
CANCEL
TIMER
SET TEMP.
℃
MEASURED TEMP.
HR
MIN.
HEATER
TIME
CLOCK
CLOSED TIME
RUN
STOP
RETURN 2SEC
POWER
Shown above is a sample fixed temp operation stand-by screen
3) Operating sequence
FIXED TEMP.
PAUSE
AUTO
START
AUTO
STOP
PROGRAM
PAUSE
TEMP. SET
TIME SET
ENTER
CANCEL
TIMER
SET TEMP.
℃
MEASURED TEMP.
HR
MIN.
HEATER
TIME
CLOCK
CLOSED TIME
RUN
STOP
RETURN 2SEC
POWER
For detailed operations and function settings,
refer to the separate
“Operation Manual for the Model
CR5 Program Controller
”.
Select an operation mode you want using the Operation mode select key. If you select a
mode the corresponding lamp will come on.
FIXED TEMP. :
3-1) Move to the FIXED TEMP. operation mode.
FIXED TEMP. AUTO STOP operation
（
End time is specified during Fixed
Temp. operation
）
FIXED TEMP. AUTO START operation
（
Start time is specified during Fixed
Temp. operation
）
PROGRAM :
3-2) PROGRAM operation mode, 3-3
）
Move to program settings.
PROGRAM AUTO START operation
（
Start time is specified during Program
operation
）
Operation mode
select key
TEMP. SET key
TIME SET key
RUN/STOP key
ENTER key
▽△
keys