Yamato IL702 Скачать руководство пользователя страница 13

Страница: 13 / 60

2. Before operating the unit

Installation procedures/precautions

【

How to install the control panel

】

1) Make sure that the breaker is at [OFF].

2) Insert the cable from the main unit into one of the

jacks on the left side of the control panel. The jacks

on the panel are for DC5V remote operation power,

DC5V power 3 pin jack, and internal communication 2

pin jack beginning from the top.

※

Excess length of the cable is only about 10 cm from

the main unit.

3) Hook the control panel to the brackets on the main

unit, then slowly slide the panel downward until it

stops.

4) After making sure that the control panel is securely

attached to the hooking brackets and connectors are

securely connected, install the knurled screws.

Make sure that the control panel has been completely

secured.

Cautions

・

Use of the panel as a remote commander is an optional function and remove the control panel only

necessary.

・

The weight of the control panel is about 1 kg. Take care not to drop it.

・

Do not put the removed control panel with the front side down or do not put anything on the panel.

・

The control panel is a high precision device. Take extreme care for handling.

・

Take care not to lose the removed knurled screws.

Содержание IL702





























































Результаты поиска

Содержание IL702

Отзывы:

Yamato IL702, Инструкция по эксплуатации, Страница: 13 / 60

Результаты поиска

Содержание IL702

Отзывы: