manualshive.com logo in svg

Yamato IC103C, Руководство пользователя

Поделиться
Скачать
Yamato IC103C Скачать руководство пользователя страница 8

6 

2. Before operating the unit

 

Precautions when installing the unit

 

 

7. Be sure to connect the power plug to the dedicated power distribution panel or 

a wall outlet.

 

Use a power distribution panel or a wall outlet that meets the electrical capacity of the unit.

 

 

Electrical 
capacity:

 

IC103C/103W    VAC115

 

1.8A 

IC403C/403CW   VAC115

 

2.8A

IC603C

 

           

 

VAC115

 

3.7A 

IC803C

   

       

 

VAC115

 

6.6A 

IC113C/113W   VAC220

 

1A 

IC413C/413CW  VAC220

 

1.4A 

IC613C

 

         

 

VAC220

 

1.8A 

IC813C

   

     

 

VAC220

 

3.3A 

＊

 

When the unit will not start even when you turn the ground fault interrupter to “ON”, 
check for low main voltage or if the unit is connected to the same power supply line 
as other devices and connect it to another line if necessary.

 

Avoid connecting too many devices using a branching outlet or extending a wire with a cord reel 
or temperature controlling function may degrade due to voltage drop.

 

 

Do not connect the unit to a gas pipe, a water pipe or a telephone line or any parts or lines, 
other than a correct power supply line.

 

Otherwise, an accident or a malfunction may result.

 

8. Handling of a power cord

 

Never use electrical power cords bundled.  When these are used bundled, they might 
overheat causing a fire. 

 

Do not convert, forcibly bend, twist or pull the power cord.    Otherwise, a fire or an electrical 
shock may result. 

 

Do not place the power cord under a desk or a chair, or sandwich between objects to avoid 
it from being damaged.    Otherwise, a fire or an electrical shock may result. 

 

Do not place the power cord close to a stove or other heat generating device.  Sheath of 
the cord may burn and result in a fire or an electrical shock. 

If the power cord should be damaged (exposure of core wire or disconnection), immediately 
turn the power switch off, pull out the power cord (plug) out of the power supply and ask 
your dealer to replace the cord.    Otherwise, a fire or an electrical shock may result. 

 

 

Connect the power cord to an appropriate wall outlet. 

9. Be sure to connect the ground wire.

 

・

 

When the unit has no ground terminal, class D grounding work is necessary and please 
consult your dealer or our nearest sales office.

 

・

 

Securely connect to an outlet.

 

 

 

We recommend use of a ground type outlet 
tap.

 

 

When there is no ground terminal.

 

In this case, class D grounding work is 
necessary and please consult your dealer or 
our nearest sales office.

 

When a bipolar type outlet tap is used

 

 
 
 
 
 
 
 
Insert the ground adaptor included as an 
option, into a power plug confirming the 
polarity of the outlet.    Connect the grounding 
wire (green) of the ground adaptor to the 
ground terminal on the power supply 
equipment.

 

 

Do not connect the grounding wire to a gas pipe, a water pipe or a telephone line or any 

parts or lines other than a correct grounding terminal.

 

Otherwise, an accident or a malfunction may result.

 

Ｇ

Ｇ

Grounded 
tap

 

Power 
plug

 

Ground wire 

Bipolar 
tap 

Содержание IC103C














































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды