YCO-1111-03-13
DP-6200
Operation Manual
9
Using the Over/Under Indicator
1) Begin with no load on the scale, the display reading zero, and
the center of zero and stable indicators lit. The small up and
down arrowheads on the right side of the display indicate that
the over and under setpoints, respectively, have been set.
2) Place the item(s) to be weighed on the scale platform. If the
item weighs less than the under setpoint, the large under arrow
will appear.
3) If the item weighs from the lower setpoint to the upper setpoint,
inclusive, the accept bullseye will appear.
4) If the item weighs more than the upper setpoint, the large over
arrow will appear.
Gross Weighing
1) Begin with no load on the scale, the display reading zero, and the
center of zero, stable and gross indicators lit.
2) Place the item(s) to weighed on the scale platform and wait for
stable indication. The weight displayed will be the gross weight.
Net Weighing
1) Begin with no load on the scale, the display reading zero, and the
center of zero, stable and gross indicators lit.
2) Place an empty container on the scale platform and press the
T
key. The weight of the container will be deducted auto-
matically, the display will read zero and the net indicator will light.
3) Place the item(s) to be weighed in the container. The weight
displayed will be the net weight.
CAUTION!
The total gross weight should not exceed the ca-
pacity of the scale. This can damage the load cell.
V Weighing
lb
lb
lb
lb
lb
lb
lb
lb
lb
