YCO-1093-04-02
CPC-2000
Operation Manual
IV Directions for Use
4
Turning the Scale On and Off
Remove everything from the platform surface, and press the
ON/OFF
key. The display will briefly display
five eights. After approximately three seconds, the display will automatically set to zero.
Press the
ON/OFF
key for about three seconds. The display will
go off. The scale can be programmed to
automatically shut off after 2, 3, 4, or 5 minutes of non-use, even if the
ON/OFF
key is not pressed.
Please see section III, “Setting the User Functions” to change this feature.
Low Battery Condition
The low battery indicator will appear when the battery pack needs to be recharged. Insert the AC
adaptor into the jack on the back of the scale. The scale may be operated while it is recharging.
Zero the Display
The scale will automatically zero when turned on. If a value is displayed when the platform is empty,
push the
ON/OFF
key to zero the display. The maximum zero range during power up is approxi-
mately 10% of the calibrated zero value, and during operation is approximately 20 divisions.
Changing Units of Measurement
To cycle through lb-oz, lb, oz and kg, press the
UNIT
key. The scale will only display the units that
have been enabled in the user or technician set-up mode. Upon startup, the scale will default to the
units that were selected when the scale was last turned off.
