6
Battery Installation/Replacement
1. Turn scale over so that display is facing down and place it upside
down on a flat level surface, such as a table or bench.
2. Locate battery cover on bottom of scale and turn locking tabs
counterclockwise.
3. Remove battery cover (lift straight up and slide it out) exposing
battery holder.
4. If installing new batteries, proceed to step 5. If replacing
batteries, remove all 4 batteries from battery holder and then
proceed to step 5.
5. Install 4 new "AA" size batteries in battery holder, noting polarity
markings as shown above.
6. After placing all 4 batteries in holder, replace battery cover on
scale. Slide tabs on battery cover into slots at back of opening,
press down on cover and turn locking tabs clockwise.
7. Turn scale over (display facing up) and press ON/OFF key.
If display turns on, batteries have been installed
correctly. If not, remove battery cover and
check for one or more improperly positioned
batteries.
–
+
–
+
Cov
er
7
SPECIFICATIONS
MODEL#
AW-WLG15
AW-WLG30
Capacity
Division
0-6 kg x 0.002 kg
5-15 kg x 0.005 kg
0-15 kg x 0.005 kg
15-30 kg x 0.01 kg
Units of Measure
kg, lb
Function keys
ON/OFF, HOLD, UNIT,
TARE/BACKLIGHT
Stabilisation Time
1-2 seconds
Operating Temp. and
humidity
5°C - 35°C
40%-95% RH
Transport and storage
temperature and
humidity
-20°C +60°C
25%-95% RH
4 x AA size Alkaline cells
Power supply
120 VAC 60Hz to15 VDC 300 mA wall
plug-in UL/CSA listed power supply
Indicator display
1.0 inch backlit LCD, 5 Digit with fraction
Dimensions
11.22" W x 10.03" D x 3.54" H
(285mm x 255mm x 90mm)
Platform Size
9.44" W x 7.28" D
(240mm x 185mm)
