Cod. 94717-94718-94719
30
That is po) to positive
（
+
）
and negative(-) to
negative(-).
Generator
overheating
1. generator overloaded
1, reduce load
2. insufficient ventilation
2. Move to adequate supply
of fresh air.
Generator stops
1. generator may have fallen
over
1. Check to make sure that
the generator is in it is
correct upright position. If
not take corrective action
to put it in the upright
position.
2. generator may have ran out
of oil
2. Check to make sure that
the generator has oil in it. If
not take corrective action
to top up the oil tank,
3. Generator may have ran out
of fuel.
3. Check to make sure that
the generator has fuel in it. If
not take corrective action
to top up the fuel tank,
4. Generator may not be
correctly ventilated with free
flowing air.
4. Check and make sure
that the generator is
located in an appropriately
ventilated environment, if
not relocate the generator
to a well ventilated
location.
5. Generator fuel cap breather
set the closed position.
5. Check that the generator
fuel cap has the breather
located switch located on
the “ON” position. Allowing
air to mix with the fuel, if the
breather cap is located in
the “off” position rotate
switch on the cap to the
“on” position
6. generator air filter may need
cleaning
6. Remove the air filter,
check to make sure that the
air filter is clean, if required
clean, dry and re-install the
air filter.
7. generator fuel filter may be
blocked
7. The internal in-line filter
may be blocked, contact
your service agent for a
