12
1.EQUIPMENT
1 pc. Impact drill
1 pc. handle and rule
1 pc. Instruction manual
2.TECHINCAL DATA
Model
TPR600/13
TPR810/13k
TPR910/13
TPR1050/13-2
Code
52625
52627
52628
95978
Tension
230 V – 50 Hz
Classe ll
Protection
Power
600W
810W
850W
1050W
N. speed
1
1
1
2
Speed R.P.M.
0-2.800
0-2.800
0-2.800
0-1000/0-2800
Reversing operation
SI
SI
SI
SI
Chuck
1- 13 mm.
1- 13 mm.
1- 13 mm.
1- 13 mm.
Drilling capacity
steel/wood/masonry
13-25-16
13-25-16
13-25-16
16-30-22
B.P.M.
0-40500
0-40500
0-44800
0-15000/0-42000
vibration: weighted
acceleration m/s
2
. K=1,5
8,72
8,82
8,93
8,74
sound power level LpA dB
(A) K=3dB(A)
87 dB(A)
89 dB(A)
90 dB(A)
95 dB(A)
Sound pressure level LwA
dB(A) K=3dB(A)
101dB(A)
100 dB(A)
101 dB(A)
101 dB(A)
Weight
1,8 kg
1,9 kg
2,35 kg
2,75 kg
Noise/Vibration Information
Measured values determined according to EN 60745.
Uncertainty K=3 dB.
Wear hearing protection!
The typically weighted acceleration is on the above table.
The vibration emission level given in this information sheet has been measured in
accordance with a standardised test given in EN 60745 and may be used to compare
one tool with another. The vibration emission level will vary because of the ways in which a
power tool can be used and may increase above the level given in this information sheet.
Note:
To be accurate, an estimation of the level of exposure to vibration experienced
during a given period of work should also take into account the times when the tool is
switched off and when it is running but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
Intended Use
The machine is intended for impact drilling in brick, concrete and stone as well as for
drilling in wood, metal and plastic. Machines with electronic control and right/left rotation
are also suitable for screwdriving and thread-cutting.
When using electric tools it is imperative to take the following basic safety precautions in
order to reduce the risk of electric shock, injury and fire. Read and take note of these
instructions before you use this tool.
3. GENERAL SAFETY REGULATION
