YAMARIN Cross 60 Cabin, Руководство пользователя, Страница: 36 / 54

Yamarin Cross 60 Cabin
36 (54)
6.2 Care instructions for seat cushions
To keep the boat's seat cushions in good condition, they should be stored in a dry, well-
ventilated space. If the cushions remain damp for any length of time, they may get mouldy
and be ruined. The warranty does not cover cushions spoilt by rain or damp.
The warranty does not cover ripped seat cushions.
6.3 Care instructions for the canopy (optional accessory)
Store the canopy over winter in a dry and well-ventilated place. The press studs of the
canopy should be sprayed with silicon spray every now and then; otherwise, they may
become so tight that the canopy will tear when trying to open them. The warranty does not
cover a torn canopy.
6.4 Care instructions for the windshield
The boat's windshield is made of tempered glass and it can be cleaned with ordinary glass
cleaners.
Useful tip:
When wiping the boat's windshield dry after cleaning, avoid using
circular motions. This can leave circular smudges on the
windshield that become visible in sunlight, impeding visibility.
Wipe off any streaks with dry newspaper or cotton cloth
using first horizontal, then vertical motions. Repeat this a few
times and you'll bring the windshield to a brilliant shine.
6.5 Care instructions for the stainless steel components
To keep the boat's stainless steel parts, such as rails, handles and bollards, shining as good as
new, the boat's owner should keep the parts clean and waxed. The edges of the mounting
flanges of the rails should also be cleaned. Any dirt that remains under the edge of the
flange will begin to look like rust. In regular use (i.e. no damage), the parts should be cleaned
and waxed at least twice every summer. The rails should also be cleaned and waxed in
autumn, when the boat is put into winter storage.
6.6 Care instructions for the remote control
Normally, the remote control needs no other maintenance apart from greasing and
calibration during winter servicing. If the remote control becomes stiff for any reason, it
needs to be serviced immediately.