YAMARIN 68 Day Cruiser, Руководство пользователя, Страница: 16 / 44

16 (44)
5.4 Loading
The maximum permitted load for the Yamarin 68 DC is 870 kg. This load includes the
following weights:
a)
the total weight of passengers 600 kg (the default weight of an adult is
assumed to be 75 kg and that of a child 37.5 kg)
b) consumable liquids (fresh water, fuel etc.) in fixed tanks 190 kg
c) personal equipment (e.g. hobby equipment and overnight equipment) 50
kg.
d) the weight of supplies and other stores 30 kg
WARNING!
When loading the craft, never exceed the maximum
recommended load. Always load the craft carefully and distribute
loads appropriately (roughly an even keel). Heavy equipment
should usually to be placed in the storage compartment under the
aft seat. If the maximum numbers of passengers are on-board you
should place the heavy equipment in the cabin to ensure that the
craft does not become tail-heavy. Always avoid placing heavy
weights high up.
5.5 Engine and propeller
The maximum recommended engine power for the Yamarin 68 DC is 250 hp (184 kW). Do
not use the boat with more power than 250 hp. The warranty is not valid if overpowered.
Follow the dealer’s instructions when choosing the propeller for your craft.
5.6 Prevention of water incursion and stability
5.6.1 Hull and deck thru fittings and closing valves
The Yamarin 68 DC has a rainwater draining system, which means that rainwater is drained
from the undecked part of the boat when the boat is on the water. The system also
functions when the boat is out of water, provided that the bow is higher than the stern. The
closing valve is located under the round hatch inside the aft seat. This drain valve is meant to
be shut at maximum load to prevent potential water incursion. In other loading conditions
the drain valve should remain open.
The boat has two bilge pumps, a hand pump and an electric pump. The electric bilge pump
has a capacity of approx. 65 l/min and the hand pump has a capacity of 0.5 l/pull.
The boat is equipped with high bilge water alarm system. Alarm system includes a float
switch located in the bilge and a warning light located on the dashboard.
WARNING! The bilge pump system is not intended to cope with a leakage
caused by running aground or other equivalent damage.