YAMARIN 600 Big Ride, Руководство пользователя

Страница: 39 / 48

Yamarin 80 Day Cruiser
39 (48)
NOTE! Do not apply any paint to the zinc anodes, log sensor, or piston
rods of hydraulic trim tabs. Do not apply paints containing copper
on aluminium parts and remember to follow the paint
manufacturer’s instructions.
Useful tips: Do not throw away a used paint brush. A dried and hardened paint brush that has
been used for antifouling paint can be reused if you first soak it for a couple of hours in a mix
of 2 litres of hot water, 100 ml of vinegar, and 50 ml of baking powder.
Perform the necessary service procedures according to the engine manual. Check the function
of electric equipment and remove possible oxidation from fuse connectors etc.
Remember that eventually, petrol turns stale in time, and that you should always use fresh
fuel when starting the engine for the first time after winter storage.
When the boat has been launched you should open all hull bushings and check to ensure that
there are no leaking hoses or connectors. Bring the safety equipment on-board before setting
off.