YAMARIN 600 Big Ride, Руководство пользователя

Страница: 22 / 48

Yamarin 80 Day Cruiser
22 (48)
The circuit fuses have been placed next to the main switch and the control point. The fuse
sizes have also been indicated in the electricity diagram. Do not change the fuse amperages or
install any components that exceed the nominal amperage of the circuit in the electric system.
Always turn off the power by using both main switches and, conversely, switch both of them
on. Switch off the power also when you carry out electric installations. Do not turn off the
direct supply (in Figure 3 above: Direct Supply) if you want the electric bilge pump to
function in your absence. However, remember to turn off the refrigerator, stove, map plotter,
radio, etc. All equipment of this kind relies on the direct supply.
NOTE ! Also turn off the power if you need to carry out electrical
installations.
NOTE ! Never switch off the main switch when the engine is running! This
could cause serious damage to the engine’s electrical system.
NOTE ! Do not carry out electrical installations (such as changing light
bulbs) while the power is on. Make sure any major electrical
installations are carried out by a professional.
Yamarin 80 DC fuse panel located at bench board:
1. Fuses
2. 12-V power outlet