Yamaha Z300A, Дополнительное руководство по обслуживанию

Страница: 20 / 90

GEN
INFO
General information
13
6D03F1X
Checking the outboard motor
mounting height
1. Check that the anti-cavitation plate is
aligned with the bottom of the boat. If the
mounting height is too high, cavitation
will occur and propulsion will be reduced.
Also, the engine speed will increase
abnormally and cause the engine to
overheat. If the mounting height is too
low, water resistance will increase and
reduce engine efficiency.
NOTE:
The optimum mounting height is affected by
the combination of the boat and the outboard
motor. To determine the optimum mounting
height, test run the outboard motor at differ-
ent heights.
2. Check that the clamp brackets are
secured with the clamp bolts.
Checking the remote control cables
1. Set the remote control lever to the neu-
tral position and fully close the throttle
lever.
2. Check that the throttle cam
1
is in its
fully closed position and align the center
of the throttle cam roller
2
with the align-
ment mark
a
.
3. Check that the center of the set pin
b
is
aligned with the alignment mark
c
on
the bottom cowling.
CAUTION:
The shift/throttle cable joint must be
screwed in a minimum of 8.0 mm (0.31 in)
d
.
S60V1040
2
a
1
S60C1190
d