manualshive.com logo in svg

Yamaha Z200, Руководство пользователя

Поделиться
Скачать
Yamaha Z200 Скачать руководство пользователя страница 36

 

Basic components

 

30

 

ous engine damage will occur.

 

●

 

Do not continue to operate the engine if
a warning device has activated. Con-
sult your Yamaha dealer if the problem

 

cannot be located and corrected.

Water separator warning

 

This indicator will blink when water has accu-
mulated in the water separator (fuel filter)
while cruising. In such an event, stop the en-
gine immediately and see page 76 of this
manual to drain the water from the fuel filter.
Get back to the port soon and consult a
Yamaha dealer immediately.

CAUTION:

 

ECM00910 

 

Gasoline mixed with water could cause

 

damage to the engine.

Engine trouble warning

 

This indicator will blink when the engine mal-
functions while cruising. Get back to the port

soon and consult a Yamaha dealer immedi-
ately.

CAUTION:

 

ECM00920 

 

In such an event, the engine will not oper-
ate properly. Consult a Yamaha dealer

 

immediately.

Low battery voltage warning

 

When the battery voltage drops, the low bat-
tery voltage warning indicator and the bat-
tery voltage value will start to blink. Get back
to the port soon if the low battery voltage
warning device has activated. For charging
the battery, consult your Yamaha dealer.

ZMU05423

ZMU05424

ZMU05425

ZMU05426

Содержание Z200



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды