PERIODIC MAINTENANCE AND MINOR REPAIR
6-11
6
2. Clean the surface of the spark plug
gasket and its mating surface, and
then wipe off any grime from the
spark plug threads.
3. Install the spark plug with the
spark plug wrench, and then tight-
en it to the specified torque.
NOTE:
If a torque wrench is not available when
installing a spark plug, a good estimate
of the correct torque is 1/4–1/2 turn
past finger tight. However, the spark
plug should be tightened to the speci-
fied torque as soon as possible.
4. Install the spark plug cap.
EAU19672
Canister (for California only)
This model is equipped with a canister
to prevent the discharging of fuel vapor
into the atmosphere.
●
Check each hose connection.
●
Check each hose and canister for
cracks or damage. Replace if dam-
aged.
1. Spark plug gap
Spark plug gap:
0.7–0.8 mm (0.028–0.031 in)
Tightening torque:
Spark plug:
12.5 Nm (1.25 m·kgf, 9.0 ft·lbf)
1. Fuel tank
2. Canister
3. Vent hose
4. Carburetor
U5AH19E0.book Page 11 Thursday, May 13, 2004 4:23 AM
Содержание YZF600RT
Страница 1: ...5AH 28199 19 LIT 11626 18 17 YZF600RT C OWNER S MANUAL...
Страница 2: ...EAU10041 U5AH19E0 book Page 1 Thursday May 13 2004 4 23 AM...
Страница 100: ...CONSUMER INFORMATION 9 8 9 U5AH19E0 book Page 8 Thursday May 13 2004 4 23 AM...
Страница 105: ...PRINTED IN JAPAN 2004 05 1 0 1 CR E PRINTED ON RECYCLED PAPER YAMAHA MOTOR CO LTD...