Yamaha YZF-R6P, Руководство пользователя

Страница: 24 / 128

INSTRUMENT AND CONTROL FUNCTIONS
3-3
3
EAU04397
Oil level/coolant temperature
warning light “
”
This warning light has the following
three functions.
● When the engine oil level is low,
the warning light comes on and
symbol “
” flashes. If this oc-
curs, stop the engine immediately
and add engine oil to the specified
level.
●
When the coolant temperature is
too high, the warning light comes
on and symbol “
” flashes. Stop
the motorcycle and allow it to idle
until the coolant temperature goes
down. If the temperature does not
go down, stop the engine. (See
the “Engine overheating” section
on page 6-48 for further instruc-
tions.)
●
When the engine oil level is low
and the coolant temperature is too
high, the warning light comes on
and symbols “
” and “ ”
flash.
The electrical circuit of the warning light
can be checked according to the fol-
lowing procedure.
1. Turn the engine stop switch to
“ ” and the key to “ON”.
2. The warning light will come on,
and symbols “ ” and “ ” will
appear in the display.
If the warning light does not come on
for a few seconds, then go off, have a
Yamaha dealer check the electrical cir-
cuit.
EC000118
CAUTION:
_
●
Do not operate the motorcycle
until you know that the engine
oil level is sufficient.
●
Do not operate the engine if it is
overheated.
_
NOTE:
_
Even if the oil is filled to the specified
level, the warning light may flicker
when riding on a slope or during sud-
den acceleration or deceleration, but
this is normal.
_
1. Oil level symbol “ ”
2. Oil level/coolant temperature
warning light “ ”
3. Coolant temperature symbol “ ”
E_5MT.book Page 3 Tuesday, August 28, 2001 2:05 PM