Yamaha YZF-R6P, Руководство пользователя

Страница: 101 / 128

PERIODIC MAINTENANCE AND MINOR REPAIR
6-46
6
EAU04374
To install the rear wheel
1. Install the wheel by inserting the
wheel axle from the left hand side.
NOTE:
_
Make sure that there is enough space
between the brake pads before install-
ing the wheel.
_
2. Install the drive chain onto the rear
sprocket, and then adjust the drive
chain slack. (See page 6-33 for
drive chain slack adjustment pro-
cedures.)
3. Install the axle nut, and then lower
the rear wheel so that it is on the
ground.
4. Install the brake caliper by install-
ing the bolts.
5. Tighten the axle nut, the brake cal-
iper bracket bolt and the brake cal-
iper bolts to the specified torques.
EAU03087
Troubleshooting
Although Yamaha motorcycles receive
a thorough inspection before shipment
from the factory, trouble may occur dur-
ing operation. Any problem in the fuel,
compression, or ignition systems, for
example, can cause poor starting and
loss of power.
The following troubleshooting charts
represent quick and easy procedures
for checking these vital systems your-
self. However, should your motorcycle
require any repair, take it to a Yamaha
dealer, whose skilled technicians have
the necessary tools, experience, and
know-how to service the motorcycle
properly.
Use only genuine Yamaha replace-
ment parts. Imitation parts may look
like Yamaha parts, but they are often
inferior, have a shorter service life and
can lead to expensive repair bills.
Tightening torques:
Axle nut:
150 Nm (15.0 m·kgf, 108 ft·lb)
Brake caliper bracket bolt:
40 Nm (4.0 m·kgf, 29 ft·lb)
Brake caliper bolt:
27 Nm (2.7 m·kgf, 20 ft·lb)
E_5MT.book Page 46 Tuesday, August 28, 2001 2:05 PM