manualshive.com logo in svg

Yamaha YZF-R1LEVC, Дополнительное руководство по обслуживанию, Страница: 54 / 87

Поделиться
Скачать
Yamaha YZF-R1LEVC Скачать руководство пользователя страница 54

CHAS

46

10.Install:

• spring seat 
• spring guide 
• spacer 
• clip 
• fork  spring 
• spring seat (upper) 
• nut 
• damper adjusting rod 
• cap bolt 
• fork bracket
• fork  stay

a. Install the spring seat, spring guide, spacer 

and circlip.

b. Install the fork spring, spring seat (upper) 

and nut.

c. Press down on the spring seat with the fork 

spring compressor 

.

d. Pull up the rod puller and install the nut 

.

e. Remove the rod puller and adapter.
f. Install the nut 

 and position it as specified 

.

g. Install the damper adjusting rod and cap 

bolt, and then finger tighten the cap bolt 
until it stop.

NOTE:

NOTE:

Install the cap bolt with rebound damping 
screw fully loosened.

h. Hold the cap bolt and tighten the nut to 

specification.

i. Remove the fork spring compressor.

WARNING

• The fork spring is compressed.
• Always use a new cap bolt O-ring.

Fork spring compressor

 

90890-01441, YM-01441

Distance 

 

More than 25 mm (0.98 in)

Nut

 

25 Nm (2.5 m

•

kg, 18 ft

•

lb)

FRONT FORK

Содержание YZF-R1LEVC
























































































Отзывы:

Нет отзывов