INSTRUMENT AND CONTROL FUNCTIONS
4
-5
4
TIP
When the switch is
only the left headlight bulb comes on.
When the switch is set to high beam,
both headlight bulbs come on.
set to low beam,
EAU12460
EAU12500
Horn switch “
”
Press this switch to sound the horn.
Right
1. Engine stop switch “
/
”
2. Start switch “
”
EAU12660
EAU12711
Turn signal switch /
To Signal a right-hand turn, push this
switch to
“
.
”
To signal a left-hand
turn, push this switch to " ". When
released, the switch returns to the
center position. To cancel the turn sig-
nal lighs, push the switch in after it
has returned to the center position.
“
”
Engine stop switch
Set this switch to
before starting
the engine. Set this switch to
“
. ” to
stop the engine in case of an emer-
gency, such as when the vehicle over-
turns or when the throttle cable is
stuck.
“
/ ”
“
”
Start switch “
”
Push this switch to crank the engine
with the starter. See page
6
-1 for start-
ing instructions prior to starting the en-
gine.
54CF8199E1.book Page 5 Thursday, April 1, 2010 1:24 PM
