ENG
5-35
7. Install:
• bolt (right crankcase cover)
• copper washer (oil drain bolt)
• oil drain bolt
• copper washer (coolant drain bolt)
• coolant drain bolt
NOTE:
NOTE:
Tighten the bolts in stage, using a crisscross
pattern.
8. Install:
• kick starter crank
NOTE:
NOTE:
Install the kick starter crank closest to but not
contacting the pillar tube
and exhaust pipe
.
9. Install:
• shift pedal
NOTE:
NOTE:
Install the shift pedal with the bottom of the
pedal outer diameter
as close to the center
of the engine mounting bolt
as possible.
10 Nm (1.0 m•kg, 7.2 ft•lb)
10 Nm (1.0 m•kg, 7.2 ft•lb)
10 Nm (1.0 m•kg, 7.2 ft•lb)
10 Nm (1.0 m•kg, 7.2 ft•lb)
10 Nm (1.0 m•kg, 7.2 ft•lb)
KICK STARTER AND SHIFT SHAFT
