background image

7-2

7

As the owner/operator, it is your responsibility
to protect yourself and your passenger from
accidents, including rollovers. The YXZ1000R
has many features, including a protective
structure and seat belts, to help protect occu-
pants, but the best way to avoid injuries is to
avoid accidents. There is a risk of injury or
death in any accident, even with these safety
features.

Driver requirements

This vehicle is intended for use only by an
operator 16 or older with a valid motor ve-
hicle license. Check country laws for mini-
mum age requirements.

The driver must be able to place both feet
flat on the floorboard while seated upright
with his/her back against the backrest.

Do not drive after using drugs or alcohol.

Remove the ignition key when the vehicle is
not in use to prevent unauthorized use of
the machine.

Parents:
Many countries have implemented new mo-
tor vehicle licensing requirements for young
drivers. These requirements are in response
to the disproportionately high rate of crashes
involving youthful drivers. As with automo-

DRIVER

UNDER

16

U2HC7LE0.book  Page 2  Wednesday, October 7, 2015  12:09 PM

Содержание YXZ10YPXG









































































































































































































Отзывы: