Yamaha YX10ZPSG Скачать руководство пользователя

Страница: 54 / 198

4-22

EBU34992

Adjusting the driver seat position

The driver seat position can be adjusted to
suit the driver’s preference.

WARNING! Nev-

er adjust the seat position while operating
the vehicle, otherwise the seat may sud-
denly change position, which may lead to
an accident.

[EWB03990]

To adjust the driver seat position, pull the
driver seat adjusting lever upward and move
the seat to the desired position.

TIP

Adjust the driver seat position and make sure
it is locked in place before starting off.

EBU35002

Adjusting the steering wheel position

The steering wheel position can be adjusted
to suit the driver’s preference.

WARNING!

Never adjust the steering wheel position
while operating the vehicle, otherwise the
steering wheel may suddenly change posi-
tion, which may lead to an accident.

[EWB04000]

To adjust the steering wheel position, pull the
steering wheel position adjusting lever and
move the steering wheel to the desired posi-
tion.

1. Driver seat position adjusting lever

U2HC70E0.book Page 22 Monday, August 17, 2015 11:59 AM

Содержание YX10ZPSG







































































































































































































Результаты поиска

Содержание YX10ZPSG

Отзывы:

Похожие инструкции для YX10ZPSG

Бренды по названию

Популярные бренды

Yamaha YX10ZPSG, Руководство пользователя

Результаты поиска

Содержание YX10ZPSG

Отзывы:

Похожие инструкции для YX10ZPSG

Бренды по названию

Популярные бренды