Yamaha YW50A, Руководство пользователя

Страница: 64 / 84

1
2
3
4
5
6
7
8
9
7-4
EAU25991
SCOOTER CARE AND STORAGE
ber by loosening the drain bolt;
this will prevent fuel deposits from
building up. Pour the drained fuel
into the fuel tank.
3. Fill up the fuel tank and add fuel
stabilizer (if available) to prevent
the fuel tank from rusting and the
fuel from deteriorating.
4. Perform the following steps to
protect the cylinder, piston rings,
etc. from corrosion.
a. Remove the spark plug cap
and spark plug.
b. Pour a teaspoonful of engine
oil into the spark plug bore.
c. Install the spark plug cap onto
the spark plug, and then place
the spark plug on the cylinder
head so that the electrodes are
grounded. (This will limit spark-
ing during the next step.)
d. Turn the engine over several
times with the starter. (This
will coat the cylinder wall with
oil.)
WARNING! To prevent
damage or injury from spark-
ing, make sure to ground
the spark plug electrodes
w h i l e t u r n i n g t h e e n g i n e
over.
[EWA10951]
e. Remove the spark plug cap
from the spark plug, and then
install the spark plug and the
spark plug cap.
5. Lubricate all control cables and
the pivoting points of all levers
a n d p e d a l s a s w e l l a s o f t h e
sidestand/centerstand.
6. Check and, if necessary, correct
the tire air pressure, and then
lift the scooter so that both of its
wheels are off the ground. Alter-
natively, turn the wheels a little
every month in order to prevent
the tires from becoming degraded
in one spot.
7. Cover the muffl er outlet with a
plastic bag to prevent moisture
from entering it.
8. Remove the battery and fully
c h a r g e i t . S t o r e i t i n a c o o l ,
dry place and charge it once a
month. Do not store the battery
in an excessively cold or warm
place [less than 0 °C (30 °F) or
more than 30 °C (90 °F)]. For
more information on storing the
battery, see page 6-21.
TIP
Make any necessary repairs before
storing the scooter.
2,(KPFF
ࡊࡠ࠮ࠬࠪࠕࡦ ࡊࡠ࠮ࠬࡑ࠯ࡦ࠲ࡊࡠ࠮ࠬࠗࠛࡠ࡯ ࡊࡠ࠮ࠬࡉ࡜࠶ࠢ